Product Features
Manufactured by: Bullet Proof Diesel
All Aluminum Body
- Perfect Fit For A Factory Look
- Super Easy To Install
- Patented Design
- (3) Tomar RECT 16 LED Lights Included (Over $400.00 Value) - You have two choices in the LED light configuration. You can choose to have Amber/Amber/Amber or Amber/White/Amber lights. The amber lights come programmed for two modes, mode 1 will be "steady burn" and mode 2 will be "flashing". The white light will be programmed mode 1 only and will be “steady burn.” Tomar LED Light Instructions Here: Operational and Programming Instructions
- Optional Custom Wiring Harness sold here: Custom Wiring Harness for (3) Tomar Lights
Also Know:
- Will add approximately 1" to the third brake light.
- May NOT be compatible with aftermarket third brake light assemblies
Mitchell1 Manual
Need help with this product? Call 1-888-967-6653 or 480-247-2331
Description
This is the perfect fit for 2015-2024 F150.
When you are in the Baja as much as Neal Technologies, you know that having great visibility means having a great LED mount. Mounting the LED lights has always been the dreaded drilling a hole in your truck. We knew that there had to be a better way and not only did we find it, we patented it too!
The Third Brake Light Mount is simple to install and can be done with a minimal amount of tools. Of course we provide installation instructions (see link above) to make installation as easy as possible.
Weather-tight Seal gasket on the back-side of the mounting flange creates a weather-tight seal against the cab.
(3) Tomar RECT 16 LED Lights Included (Over $400.00 Value) with this mount. You have two choices in the LED light configuration. You can choose to have Amber/Amber/Amber or Amber/White/Amber lights. The amber lights come programmed for two modes, mode 1 will be "steady burn" and mode 2 will be "flashing". The white light will be programmed mode 1 only and will be "steady burn." Professional installation recommended for light wiring, switch selection and overall electrical circuit design.
Power Pass Thru Option: 2 feet of 12 gauge wire is included and terminated with the exterior plug. 2 feet of 12 gauge wire is included and terminated with the interior plug. Soldering and heat shrink is recommended for adding length to these existing wires. The plug included with these wiring lengths is rated at up to a 20 amp circuit. Professional installation recommended for light wiring, switch selection and overall electrical circuit design.
Before You Purchase
May not be compatible with aftermarket third brake light assemblies.