Third Brake Light Antenna Mount 2010-2024 RAM 2500/3500/4500

Bullet Proof DieselSKU: 90201152

Price:
Sale price$359.65
See important purchase information Know This Before You Buy

Product Features

Third Brake Light Antenna Mount 2010-2024 RAM 2500/3500/4500

Manufactured by: Bullet Proof Diesel

  • All Aluminum Body
  • Brass NMO Antenna Base
  • 15' Co-Axial Cable Included
    • Call If You Need A Longer Cable 
  • PL-259 Male UHF Connector
    • Call If Other Connector Is Needed 
  • Perfect Fit For A Factory Look
  • Super Easy To Install
  • No Large Hole To Drill In The Top Of Your Cab
  • Compatible With or Without Third Brake Light Integrated Camera
  • Patented Design

Also Know:

  • May NOT be compatible with aftermarket third brake light assemblies
  • Works With Factory Third Brake Light Part #'s
    • 68523968AA
    • 68412024AA
    • 68523966AB
    • 68523966AC

Mitchell1 Manual Installation Manual

Need help with this product? Call 1-888-967-6653 or 480-247-2331

Description

This product fits 2010-2024 Ram 2500/3500/4500 Trucks. 

When you are in the Baja as much as Neal Technologies, you know that having great communications means having a great antenna. Mounting that antenna has always been a choice between a temporary magnetic base mount or the dreaded drilling a large hole in the top of your truck. We knew that there had to be a better way and not only did we find it, we patented it too!

The Third Brake Light Antenna Mount is simple to install and can be done with a minimal amount of tools. Of course we provide installation instructions (see link above) to make installation as easy as possible.

The Third Brake Light Antenna Mount features a lot of great benefits:

Save your Roof allows for an effective and simple way to attach an antenna at the back of the cab of your truck - without drilling a hole!

High-mount Location is the optimal location for maximum antenna effectiveness.

Weather-tight Seal gasket on the back-side of the mounting flange creates a weather-tight seal against the cab.

15-foot RG-58 A/U Co-axial Cable that is easy to run inside the cab above the head liner and then routed to various locations for your radio install.

Industry Standard Connectors with an NMO-style antenna base that is connected to fifteen feet of co-axial cable terminated with a PL-259 male UHF connector that works with a wide-range of popular radios on the market.

Do you need a different length cable (standard is 15 feet)? Please give us a call and we can assist you with your specific needs!

Before You Purchase

  • Will add approximately 1" to the third brake light.
  • May not be compatible with aftermarket brake light assemblies.

You may also like

Recently viewed

Customer Reviews

Based on 11 reviews
91%
(10)
9%
(1)
0%
(0)
0%
(0)
0%
(0)
P
Pietro Romano
Great Mount

This mount is amazing. Allowed me to install a gmrs radio without a single wire showing and no drilling into the cab. I would reccommend this to anyone interestred in a clean installation of a radio in your truck

T
Ted
Fantastic Mount

Considering all options, this mount is by far the best choice for a solid off-road capable mount. In my case, I needed a 2M/70cm antenna mount, but I don't have a lot of vertical clearance in my garage, so I paired this mount with a short antenna and it operates much better than a hood or stake mount down lower would be. This mount looks great, is well-constructed, and is simple to install.

B
Bill Weatherby
Excellent product and fit.

Great fit and extremely easy installation. Definitely is expensive but a heck of a lot better than drilling a hole in the cab of my truck!

P
Paul Burke
Great fit

It fit great didn’t take but a few minutes to put in and I was happy with my results just follow the instructions that came with it, and all works well.

R
Rick Gruber
HD mount for HD trucks.

I've used many antenna mounts in my 30 plus years in amateur radio and this mount is by far the cleanest and most rigid I've ever used. I wish it was available for my other vehicles.