Product Features
Manufactured by: Bullet Proof Diesel
- Aluminum Tanks - Not Plastic Like OEM
- Aluminum Hose Connections
- Direct Fit And Function In The F-Series 2003 - 2004 Ford 6.0L
- Not Compatible With Manual Transmissions
- Similar Cooling Capacity To OEM With Better Construction
- Free Ground Shipping To Lower 48 States
Mitchell1 Manual
Need help with this product? Call 1-888-967-6653 or 480-247-2331
Description
A Heavy Duty, All-Aluminum Radiator for the 2003 - 2004 Ford 6.0L Diesel. No more plastic tanks or plastic hose connections - go with the stronger, better, all-aluminum option at a great price!
While this radiator is not made by Bullet Proof Diesel, it has been tested, used and abused on Bullet Proof Diesel trucks with fantastic results.
Radiator Specifications:
-
Dimensions
- Height - 28 ½"
- Thickness - 1 7/16"
- Width - 30 1/16"
-
Core
- Rows - 1 (single)
- Tanks - Aluminum
- Core - Aluminum
- Inlet diameter - 1¾"
- Outlet diameter - 2"
-
Transmission Cooler
- 7 Plate
- Length - 12"
You may also like
Recently viewed
Very solid radiator that was about as easy to install as it gets. Shipping was earlier than the estimated time frame and the packaging was great. BPD customer service was friendly and helpful when I called to ask about average shipping times.
I drove the truck hard for about 30 minutes after initial install with no issues. I also hauled a dump trailer with roofing totaling nearly 11000 lbs (3.66 tons + 2ton trailer) to the landfill again with zero issues.
Engine runs just below halfway on the temp gauge now as opposed to right at halfway on previous radiators.
I highly recommend both the product and BPD.
Item was shipped quickly after order was placed. Packaging was good and product arrived in great shape. Everything matched the OEM radiator and did not require sourcing fittings. Installation was easy to do. Great product and service.
Product delivered as stated & in great shape. Packaging was exactly as stated on line, very well packed.
Once installed replacing my 20 year old OEM radiator I’m noticing a significant reduction in temp. Temp consistently stays at or below thermostat rating now. Never did this before. Never over heating but always running warmer.
It was an easy install once I got the fan bolt off. My Bullet proofing is just about complete. Truck runs great. Thank you BPD!
Nice product for the money. For a large 1row aluminum vs the stock ford 2 row copper, the cooling is excellent. After the stock ford plastic radiator split at the top hose connector, I started researching for an aftermarket all aluminum. The bullet proof diesel radiator arrived well packaged with just a few collapsed inner fins. No big deal. Placed both radiators side by side and they were almost exactly the same. Bullet proofs is a little thinner. Everything bolted right up. Shroud perfectly sealed. Your small gap will be at the condenser side. I just took the vertical rubber seals off the ford radiator and they locked perfectly in place on the bullet proof. Did both upper and lower hoses while in there. Fired it up and no leaks, first time. The radiator is also pleasing to look at. Came with seals and fittings in place for the transmission lines. Threads matched perfectly. For the money, a total SCORE. It shipped the same day I bought it. Came in a few days. Excellent service. Ford wanted $850.00 for the plastic/copper OEM radiator, which I noticed is assembled in Mexico.
Radiator fit great easy install.