Product Features
Manufactured by: Bullet Proof Diesel
- All Aluminum Body
- With or Without LED Lights
- Brass NMO Antenna Base
- 15' Co-Axial Cable Included
- Call If You Need A Longer Cable
- PL-259 Male UHF Connector
- Call If Other Connector Is Needed
- Perfect Fit For A Factory Look
- Super Easy To Install
- No Large Hole To Drill In The Top Of Your Cab
- Patented Design
Also Know:
- Will add approximately 1" to the third brake light.
- May NOT be compatible with aftermarket third brake light assemblies
- Not compatible with the Classic Body Style trucks - You can find the Classic Body Style Antenna Mount here: 2019 - 2020 Ram 1500 Classic Body Truck
Mitchell1 Manual Installation Manual
Need help with this product? Call 1-888-967-6653 or 480-247-2331
Description
This product fits 2019 - 2025 model year Ram 1500 Trucks and TRX with or without factory camera.
When you are in the Baja as much as Neal Technologies, you know that having great communications means having a great antenna. Mounting that antenna has always been a choice between a temporary magnetic base mount or the dreaded drilling a large hole in the top of your truck. We knew that there had to be a better way and not only did we find it, we patented it too!
The Third Brake Light Antenna Mount is simple to install and can be done with a minimal amount of tools. Of course we provide installation instructions (see link above) to make installation as easy as possible.
The Third Brake Light Antenna Mount features a lot of great benefits:
Save your Roof allows for an effective and simple way to attach an antenna at the back of the cab of your truck - without drilling a hole!
High-mount Location is the optimal location for maximum antenna effectiveness.
Weather-tight Seal gasket on the back-side of the mounting flange creates a weather-tight seal against the cab.
15-foot Co-axial Cable that is easy to run inside the cab above the head liner and then routed to various locations for your radio install.
Industry Standard Connectors with an NMO-style antenna base that is connected to fifteen feet of co-axial cable terminated with a PL-259 male UHF connector that works with a wide-range of popular radios on the market. Need an SMA instead of a PL-259 for a weBoost Cell Signal Booster? We can do that, just give us a call at 480-247-2331.
Do you need a different length cable (standard is 15 feet)? Please give us a call and we can assist you with your specific needs!
***Professional installation recommended for light wiring, switch selection and overall electrical circuit design.***
Before You Purchase
May not be compatible with aftermarket brake light assemblies.
You may also like
Recently viewed
Customer Reviews
Absolutely love the product. Fits my truck perfectly. Only thing that stops it from getting a 5 star is the price. Its was just so expensive. But I would spend the money over again if I needed another.
Right out of the box, I was VERY impressed with the quality in manufacturing and design. This mount isn't blocky and doesn't have the typical "machined" look you will find on other similar products. The lines are smooth, the edges curve and bevel creating a seamless factory look after install. The bracket is painted and has the same high shine as my truck's factory paint.
I purchased this product for the sole fact that the chase lights were already integrated and it was the least invasive way to get chase lights mounted while still maintaining a factory appearance. I do not have a radio and I don't intend to use the coax lines - but I did keep them just inside the headliner in case I change my mind.
I ended up finding that the LAIRD Rain Cap for NMO Mount, Black Metal - fit perfectly. Covered all the threads of the antenna mounts and the paint also matched the bracket perfectly. The leads on the Rigid Industries lights (Type A - High Power 400 Watts) were short, so I definitely recommend extending them before you install so you aren't struggling with space underneath the headliner. I used weather pack connectors which made installation as simple as possible - all I had to do was click the connectors together.
I wish I could post a photo here, but I am very happy with the install and quality of the bracket. Everything went back together and functioned flawlessly. Instructions could use an update for more clarity (i.e. mounting holes used and at which step).
The fitment was perfect, and the mount is extremely durable and well-made. The installation was very straightforward and took less than 30 minutes. The look of this dual antenna mount is surprisingly low profile despite being able to support heavy duty antennas. AWESOME product. To top it off, I ordered the NMO caps from BulletProof, and, due to some design changes, didn't fit this mount. Not only did they refund me, but they also sent me a new support bracket since the one I received was not threaded correctly on one screw. Outstanding product, outstanding customer service. GREAT company. Worth the price as nothing that provides the same function is even remotely close in quality to this (including the Larsen third brake light mount). This thing is just pure awesome. Thanks!!
The quality and fitment of the antenna mount is top notch. Keeps the factory LED cargo light and camera intact. Highly recommend this!