Third Brake Light Antenna Mount - 2009 - 2014 Ford F150

Bullet Proof DieselSKU: 90201128

Price:
Sale price$359.65
See important purchase information Know This Before You Buy

Product Features

Third Brake Light Antenna Mount - 2009 - 2014 Ford F150

Manufactured by: Bullet Proof Diesel

  • All Aluminum Body
  • Brass NMO Antenna Base
  • 15' Co-Axial Cable Included
    • Call If You Need A Longer Cable 
  • PL-259 Male UHF Connector
    • Call If Other Connector Is Needed 
  • Perfect Fit For A Factory Look
  • Super Easy To Install
  • No Large Hole To Drill In The Top Of Your Cab
  • Patented Design

 

ALSO KNOW:

  • Need To Verify Third Brake Light Has 2 Bulbs Only
  • Will NOT Work With 3 Bulb Third Brake Lights

 


Mitchell1 Manual Installation Manual

Need help with this product? Call 1-888-967-6653 or 480-247-2331

Description

This version is the perfect fit for your Ford F-150 from 2009 through 2014 model years with a 2 light bulb third brake light!

When you are in the Baja as much as Neal Technologies, you know that having great communications means having a great antenna. Mounting that antenna has always been a choice between a temporary magnetic base mount or the dreaded drilling a large hole in the top of your truck. We knew that there had to be a better way and not only did we find it, we patented it too!

The Third Brake Light Antenna Mount is simple to install and can be done with a minimal amount of tools. Of course we provide installation instructions (see link above) to make installation as easy as possible.

The Third Brake Light Antenna Mount features a lot of great benefits:

Save your Roof allows for an effective and simple way to attach an antenna at the back of the cab of your truck - without drilling a hole!

High-mount Location is the optimal location for maximum antenna effectiveness.

Weather-tight Seal gasket on the back-side of the mounting flange creates a weather-tight seal against the cab.

15-foot RG-58 A/U Co-axial Cable that is easy to run inside the cab above the head liner and then routed to various locations for your radio install.

Industry Standard Connectors with an NMO-style antenna base that is connected to fifteen feet of co-axial cable terminated with a PL-259 male UHF connector that works with a wide-range of popular radios on the market.

Do you need a different length cable (standard is 15 feet)? Please give us a call and we can assist you with your specific needs!

Before You Purchase

  • Will add approximately 1" to the third brake light.
  • May not be compatible with aftermarket brake light assemblies.
  • Will not work with 3 light bulb third brake lights

You may also like

Recently viewed

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
V
Victor
Slick Antenna mount solution!!

Gone are the days of worrying about whether or not to drill a 3/4" hold on your new/old truck and some day dreading to see a water leak in the distant future. Although, the purist would say that you would need to put it closer to the center of the cab for ground plane performance but I've found that it works well enough as long as you tune the SWR once you get your radio & antenna correctly matched. Then you're golden!!! Hardest part is the routing of the cable inside of the cab and deciding where to put the radio. Carpet is a bit snug the F-150 and temporarily removing the seat would make it super easy if you're going to mount under the seat or put inside of the center console. Cable long enough to get you to the center console easily.

K
Kraig
Clean

Easy install , very clean looking , dose not effect clearance when antenna is not installed

J
Jason G.
Love It!

Installed the third brake light antenna mount on my Raptor and absolutely love it! The install was quick and easy, and the quality of the part was second to none. Would absolutely recommend to anyone running a race or ham radio!