Categories

Install the HPOP Fitting Upgrade Kit

Posted by Mathis Riiber on

Install the HPOP Fitting Upgrade Kit

Download the PDF installation guide here:

Read more →

Read This Before This Before Installing the BulletProof EGR Cooler

Posted by Mathis Riiber on

Read This Before This Before Installing the BulletProof EGR Cooler

Due to the variation in the EGR cooler flanges, it may be necessary to drill out the holes in the Intake Manifold. Use up to a 5/16 inch diameter drill if needed.Please make sure that all parts fit together before tightening the Intake Manifold. Make sure that there is sufficient clearance all along with the EGR Cooler.Tech Support: 1-888-967-6653Download PDF Manuel  

Read more →

Identify the New or Original Ford OEM Condenser

Posted by Mathis Riiber on

Identify the New or Original Ford OEM Condenser

Please Note: The Ford OEM A/C Condenser has changed. Download PDF here: 

Read more →

Installation of the BPD Fan Clutch Adapter

Posted by Mathis Riiber on

Installation of the BPD Fan Clutch Adapter

Note: Be sure to check serpentine belt and tensioner; replace as necessary.  During the install of the Fan Clutch Adapter, please check your water pump pulley for a "glaze" that may have formed over time.          With the engine off, you may want to "scuff" up the water pump pulley prior to installation of the fan clutch adapter, as this can help to prevent slippage and squealing under heavy...

Read more →